DJI Phantom 4 and Phantom 3 (Pro/Adv) HDMI Output Upgrade Board Module (Part 54)

$169.00
In Stock



Calculate Shipping


Buy your DJI Phantom 4 and Phantom 3 (Pro/Adv) HDMI Output Upgrade Board Module from Rise Above in Sydney, and have confidence that you are dealing with Australia's UAV experts.  We ship all across Australia and Internationally, and always offer Australia's best prices. If you find a lower price elsewhere, we will do our best to match it!  We have a team of technicians who can handle most warranty issues locally, as well as repairs, maintenance and upgrades.  For more info, click here

This Upgrade Module allows for HDMI Output from the Phantom 4 and Phantom 3 (Pro/Adv) RC similar to that of the HDMI Output on the DJI Inspire 1. HDMI Output allows for endless possibilities for broadcasting or monitoring the Phantom 3's live video feed to a separate screen or FPV goggles. Live data from the Phantom 4 and Phantom 3 (Pro/Adv) can also be exported via the HDMI Output Board. Compatible with the DJI Phantom 4 and DJI Phantom 3 Professional and Advanced models. NOT compatible with DJI Phantom 3 Standard.

Installation of the Upgrade Module is quite easy and only takes about 5-10 minutes.

The HDMI Output Module for the Phantom 4 and Phantom 3 (Pro/Adv) can export 720P real-time images via an HDMI port to a separate screen or FPV Goggles.

Live data of flight controls, video feedback and the aircraft’s battery levels can be exported via the HDMI Output Module.
You can also choose to switch off the data display on your app.
This module can be mounted on the back of the Phantom‘s remote controller.
It includes a Mini-HDMI output port, Micro-USB port, USB port and a CAN expansion port.

(DJI-PH3-HDMI-OUT-BRD-P54)

SKU DJI-PH3-HDMI-OUT-BRD-P54
Brand DJI
Shipping Weight 0.0450kg
Shipping Width 0.090m
Shipping Height 0.030m
Shipping Length 0.060m

DJI Phantom 4 and Phantom 3 (Pro/Adv) HDMI Output

By: on 17 May 2017
This item arrived on time and as ordered. It was very easy to install as long as care was taken.The screws supplied were small and I used a small magnet to hold them on the driver. Make sure that the magnet was up the blade and away from the board. I took the magnet of the driver as soon as i had lined each screw up and it fell nicely into its place. When removing the cover plate it exits from the bottom of the plate and clicks into place putting the top of the plate in first and then clicking the bottom in gently. No extreme force was necessary. WARNING -- The controller must be turned off at all times and I made sure that the controller was fully charged before I started the installation. I made the mistake of testing the system with a partially charged Quad battery and at first I thought there was some thing wrong. I charged the flight battery and again had no result until I discovered that my Quad doesn,t like being run in very close proximity to the transmitter. FLOODING. Moved away and every thing worked flawlessly. Very happy and the camera lens stabiliser was great. Again . Very easy and very happy.
(5)

Insallation

By: on 31 March 2016
Im 55yo with fat fingers and it only took me 5 minutes to install......easy as 1...2...3!!
(5)

HDMI Upgrade

By: on 29 March 2016
When DJI Tech Support diagnosed a faulty USB port on my Phantom 3. I took advantage of this repair and upgraded to incorporate a HDMI port at the same time. This will allow for future improvements to my flying experience. The very efficient service provided by the Rise Above Team was well worth the two hours travel time.
(5)

Write a product review


Others Also Bought



More From This Category