DJI Agras MG-1 Agriculture Spraying Drone




Calculate Shipping


The DJI Agras MG-1 is an octocopter designed for precision variable rate application of liquid pesticides, fertilizers and herbicides, bringing new levels of efficiency and manageability to the agricultural sector. It is exclusively available in Australia through Rise Above Custom Drone Solutions.

MAXIMUM EFFICIENCY

The powerful propulsion system enables the MG-1 to carry up to 10kg of liquid payloads, including pesticide and fertilizer. The combination of speed and power means that an area of 4,000-6,000 m² can be covered in just 10 minutes, or 40 to 60 times faster than manual spraying operations. The intelligent spraying system automatically adjusts its spray according to the flying speed so that an even spray is always applied. This way, the amount of pesticide or fertilizer is precisely regulated to avoid pollution and economize operations.

7-10Acres / Hour

10kgPayload

40-­60 times faster than manual spraying

LIQUID TANK

RELIABILITY AND LONGEVITY

Equipment used in plant protection operations is susceptible to dust and corrosion, leading to high cost of maintenance and shortened lifespans. To counteract degradation, the MG-1 is designed with a sealed body and an efficient, integrated centrifugal cooling system. As it flies, the surrounding air enters the aircraft body via the front inlet, equipped with a triple filter system that keeps dust and particulate matter from entering. The air then passes through each of the aircraft’s arms to the motors, capturing heat from all components and the entire structure before exiting and dissipating the heat to the surrounding air. The combination of cooling and filtering increases the expected lifespan of each motor by up to three times.

ACCURATE SPRAYING

Spray nozzles can be chosen according to the properties of each liquid to optimize atomization, energy efficiency and the amount of liquid sprayed. The included ceramic nozzle is resistant to wear and can be used for thousands of hours of effective spraying without degradation. In total, the MG-1 has four nozzles, each placed directly below a motor. The downward airflow generated by the propellers accelerates the spray, increasing its reach.

Interchangeable Nozzle   Atomized Spraying   All round Spraying

EASE OF USE

The advanced flight controller integrated with the aircraft instantly and precisely responds to the pilot’s input. Choose between three flight modes: Smart mode, Assisted mode and Manual mode, according to terrain and the specific needs of each mission. 

Under Smart mode, the flight can be easily planned with the press of a few buttons, without the need for mapping knowledge or other software, making the MG-1 not only the most efficient but also the most easy to use spraying solution. In Assisted mode, the aircraft performs the same turns at the press of a button as it does automatically under the Smart mode, allowing for planning to be done on the fly for fields of irregular shape. Under Manual mode, the pilot freely navigates the aircraft.

INTELLIGENT MEMORY

The MG-1 automatically records its current and remembers its past coordinates as it makes its way across the field. In case the operation is interrupted, for example due to depleted battery or spraying liquid, flight easily be resumed from the last point in its memory after changing the battery or refilling its tank.

 

Low Volume Warning

 

Flight Task Resume

System Data Memory

 

FOLDABLE DESIGN

The MG-1 design is based on a Y-type folding structure that can be installed without the use of any additional tools. Motor arms fold inwards making the aircraft compact and easy to transport, for example in the trunk of a car. Made from high-strength carbon fiber materials, the body frame is light yet durable and able to withstand the harshest conditions.

TERRAIN FOLLOW

By integrating a microwave radar together with the MG-1's intelligent flight control system, the aircraft is able to scan the below terrain in real-time, and adjust to keep a constant, centimeter accurate, height above crops. Spray density is maintained even as the terrain rises and drops, so that the optimal amount of liquid is applied at all times.

DEDICATED REMOTE CONTROLLER

The dedicated remote controller is equipped with the latest Lightbridge 2 transmission system which enables ultra low-latency controls. Like the aircraft body, the remote is designed with water and dust protection. A special low-energy display panel gives real-time flight information and is able to last over extended periods of time on a single charge. Together with the highly responsive joysticks and convenient function keys, mastering the art of agricultural spraying is made easier than ever before.

 

The DJI Agras MG-1 is dustproof, water-resistant and made of anti-corrosive materials. It can be rinsed clean and folded up for easy transport and storage after use.

The eight-rotor Agras can load more than 10 kilograms of liquid for crop-spraying and can cover between seven and 10 acres per hour. It is over 40 times more-efficient than manual spraying. The drone can fly up to eight meters per second and adjusts spraying intensity to flying speed, ensuring even coverage.

“The launch of DJI’s agricultural drone displays our unmatched knowledge base and development skills,” said DJI CEO and founder Frank Wang. “With this new product, we’ve shown that DJI can not only offer the ultimate aerial experience for the mass consumer, but also improve the efficiency of production and benefit so many others in all walks of life.

The Agras features DJI’s industry-leading flight-control system and microwave radar to ensure centimeter-level accuracy. During flight, the drone scans the terrain below in real-time, automatically maintaining its height and distance from plants to ensure application of an optimal amount of liquid. DJI’s real-time Lightbridge 2 transmission system is also onboard.

Users can select automatic, semi-automatic or manual operation modes, depending on terrain, with uniform spraying carried out via the drone’s nozzles. The drone has four replaceable, ceramic nozzles, each powered by a motor. The included nozzles can be used for thousands of hours of spraying. Downward airflow generated by the rotors increases spraying velocity and ensures the agent will reach plant stems and leaves near the soil.

The Agras MG-1’s body is sealed, and features an integrated centrifugal cooling system designed to extend motor life by up to three times. Triple-filtration cuts off intake of mist, dust and large particulates to reduce wear from impurities. As the drone flies, air enters the aircraft body via the front inlet, is filtered and passes through each of the aircraft’s arms to the motors, capturing heat from all components and the entire structure. Heat is then dissipated by venting into the surrounding air.

The drone’s intelligent memory function means after the Agras MG-1 is brought back to base for refill or recharge, it will return to its last memory point to pick up spraying where it left off.

Users control the Agras with a custom DJI remote. Its low-energy display panel gives real-time flight information and lasts for extended periods on a single charge.

(DJI-AG-MG1-DRONE)

 

 

AIRCRAFT FRAME

Diagonal Wheelbase    1520 mm
Frame Arm Length    625 mm
Dimensions    
1471mm x 1471mm x 482mm (arm unfolded, without propellers)
780mm x 780mm x 482mm (arm folded)

PROPULSION SYSTEM

MOTOR

Stator Size    60mm x 10 mm
KV    130 rpm/V
Max Thrust    5.1 kg/rotor
Max Power    770 W
Weight (with cooling fan)    280 g

ESC

Max Allowable Current (Continuous)    25 A
Operating Voltage    12S LiPo
Signal Frequency    30 to 450 Hz
Drive PWM Frequency    12 kHz

FOLDABLE PROPELLER

Material    High-performance engineered plastics
Diameter / Pitch    21x7.0 inch (533x178 mm)
Weight    58 g

SPRAY SYSTEM

LIQUID TANK

Volume    10 L
Standard Operating Payload    10 kg
Max Battery Size    151mm x 195mm x 70mm

NOZZLE

Model    XR11001
Quantity    4
Max Spray Speed    0.43 L/min (per nozzle, for water)
Spray Width    4 - 6 m (4 nozzles, 1.5 – 3 m above the crops)
Droplet Size*    XR11001: 130~250 μm
*Droplet size may vary according to operation environment and spraying speed.

FLIGHT PARAMETERS

FEATURES

Total Weight (without batteries)    8.8 kg
Standard Takeoff Weight    22.5 kg
Max Takeoff Weight    24.5 kg (@ sea level)
Max Thrust-Weight Ratio    1.81 (with 22.5 kg takeoff weight)
Power Battery    DJI Designated Battery (MG-12000)
Max Power Consumption    6400 W
Hovering Power Consumption    3250 W (with 22.5 kg takeoff weight)
Hovering Time    
24 min (@ with 12.5 kg takeoff weight)
10 min (@ with 22.5 kg takeoff weight)
Max Operating Speed    8 m/s
Max Flying Speed    22 m/s
Recommended Operating Temperature    0 to 40℃
 

REMOTE CONTROLLER

FEATURES

Model    GL658C
Operating Frequency    2.400 - 2.483 GHz
Max Transmission Range (unobstructed, free of interference)    1km
EIRP    100 mW @ 2.4 GHz
Built-in Battery    6000 mAh, 2S LiPo
Charging    DJI charger
Output Power    9 W
Operating Temperature Range    -10 to 40℃
Storage Temperature Range    
Less than 3 months: -20 to 45℃
More than 3 months: 22 to 28℃
Charge Temperature Range    0 to 40℃

REMOTE CONTROLLER CHARGER

FEATURES

Model    A14-057N1A
Voltage    17.4 V
Rated Power    57 W

SKU DJI-AG-MG1-DRONE
Brand DJI
Shipping Weight 16.0400kg
Shipping Width 0.810m
Shipping Height 0.450m
Shipping Length 0.860m
Shipping Cubic 1.000000m3

Be The First To Review This Product!

Help other Rise Above users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category