AIMDROIX Extended Aluminum Arm V2 for Multirotors [colour: Red]
Notify me when back in stock
•Stronger and stiffer than the stock plastic DJI Flamewheel arms.
•Made out 6061 T6 High strength aluminum
•50mm longer than stock plastic DJI Flamewheel arms.
•Works as a heat sink; dissipating heat from the motor.
•Different color anodized finish helps with orientation like the stock arms.
•CNC machined to give a nice surface finish and look that no other multirotor will have.
•Motor mounting holes : 16mm to 25mm
•Weight :53 grams. (DJI Stock arms 54g)
•Works with any multirotor that uses DJI style arms*.
•Arms are 32mm tall at root.
The optimized AIMDROIX V2 Aluminum Arms will improve the performance of your multirotor and will give it a professional look. The arms were designed for aerial video and photography in mind but also for FPV. Because of the extended length, you'll add 100mm in diameter to your multirotor improving your flight stability and also allowing it to use up to 14 inch props on your F450quad (12in for hexa, 13in max for TBS Discovery) . The arms have motor mounting slots that allows to use a variety of motor sizes from 16mm to 25mm. Also, the arm work as a heat sink, dissipating heat from the motordissipating heat from the motor and transferring it along the arm; helping y our motors to run cool increasing life and efficiency.
Unlike arms from other companies, this arm design was optimized using extensive engineering analysis to improve the arm stiffness and durability . This makes them as light as possible, but much stronger in cases where the stock plastic arms will easily and where other aluminum arms will bend. As these aluminum arms are stiffer in all axes, they will not flex like the stock plastic arms or like poorly designed aluminum arms. With the optional AIMDROIX coaxial motor mounts, it will be possible to convert your to convert your quad to an X8 configuration, allowing you to fly on strong winds and to be able to lift even more payload.
The AIMDROIX Aluminum Arms will improve the performance and give an unique look to your multirotor. The arms were designed for aerial video and photography in mind but also for FPV. Because of the extended length, you'll add 100mm in diameter to your multirotor, improving your flight stability and also allowing it to use up to 14in props on your DJI F450 quad or 12in props on your DJI F450 hexacopter. The arms have motor mounting slots that allows to use a variety of motor sizes selections from 16mm to 25mm. Also, the arm work as a heat sink, dissipating heat from the motor and transferring it along the arm; helping your motors to run cool.
*These arms are slightly shorter in height than the stock DJI arms. For frames such as the stock DJI Flamewheel frames where the arms determine the distance between the boards, this is not an issue. For frames that have a fixed height due to other components, you will also need to purchase one spacer set for each arm. For frames such as the Discovery which have power connections right where the arms connect, you will need the two piece spacer set. Note: Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms,.
The AIMDROIX Aluminum arms were the first DJI style upgrade arms in the market back in August 2013, everything after are just a copy of our innovation. Buy the real thing, buy AIMDROIX.
Extended aluminum arms for DJI Flamewheel F450
Extended aluminum arms for DJI Flamewheel F550
Be The First To Review This Product!
Help other Rise Above users shop smarter by writing reviews for products you have purchased.